Product Description
RF-BM-2652P1 CC2652P module Multiprotocol 2.4 GHz Wireless Module with Integrated Power Amplifier
RF-BM-2652P1 is an RF module based on TI lower-power CC2652P SoC, which is a multiprotocol 2.4 GHz wireless module supporting Thread, Zigbee?, Bluetooth? 5.1 Low Energy, IEEE 802.15.4, IPv6-enabled smart objects (6LoWPAN), proprietary systems, including the TI 15.4-Stack (2.4 GHz), and concurrent multiprotocol through a Dynamic Multiprotocol Manager (DMM) driver. It integrates a 48 MHz crystal and a 32.768 kHz crystal, 352 KB of in-system Programmable Flash, 256 KB ROM, 8 KB of Cache SRAM, 80 KB of ultra-low leakage SRAM. Its ARM? Cortex?-M4F core application processor can operate at an extremely low current at flexible power modes. And the module enables long-range and low-power applications using integrated +20 dBm high-power amplifier with best-in-class transmit current consumption at 85 mA. It features small size, robust connection distance, and rigid reliability.
Parameters of RF-BM-2652P1
Chipset | CC2652P |
Supply Power Voltage | 1.8 V ~ 3.8 V, 3.3 V is recommended |
Frequency | 2402 MHz ～ 2480 MHz |
Maximum Transmit Power | +20.0 dBm |
Receiving Sensitivity | -100 dBm @ 802.15.4 (2.4 GHz) -105 dBm @ Bluetooth 125 kbps (LE Coded PHY) |
GPIO | 23 |
Power Consumption | RX current: 6.9 mA TX current: 7.3 mA @ 0 dBm 9.6 mA @ 5 dBm 22 mA @ 10 dBm 85 mA @ dBm MCU 48 MHz (CoreMark):3.4 mA (71 μA/MHz) Sensor Controller：30.1 μA @ Low Power-Mode, 2 MHz, running infinite loop 808 μA @ Active-Mode, 24 MHz, running infinite loop Standby: 0.94 μA Shutdown: 150 nA |
Support Protocol | Bluetooth 5.1 Low Energy, ZigBee, Thread, IEEE 802.15.4, 6LoWPAN |
Crystal | 48 MHz, 32.768 kHz |
Package | SMT packaging (Half hole) |
Communication Interface | UART, SPI, I2C, I2S, ADC |
Dimension | 25.0 mm × 16.4 mm × (2.2 ± 0.1) mm |
Type of Antenna | Half-hole antenna interface |
Operating Temperature | -40 ℃～ +85℃ |
Storage Temperature | -40 ℃～ +125 ℃ |
Pin Attributes
Pin Function of RF-BM-2652P1
Pin | Name | Function | Description |
1 | DIO5 | GPIO | GPIO, Sensor Controller, high-drive capability |
2 | DIO6 | GPIO | GPIO, Sensor Controller, high-drive capability |
3 | DIO7 | GPIO | GPIO, Sensor Controller, high-drive capability |
4 | DIO8 | GPIO | GPIO |
5 | DIO9 | GPIO | GPIO |
6 | DIO10 | GPIO | GPIO |
7 | DIO11 | GPIO | GPIO |
8 | DIO12 | GPIO | GPIO |
9 | DIO13 | GPIO | GPIO |
10 | RES | RES | Reset, active lo. No internal pullup resistor. |
11 | JTAG_TMSC | JTAG_TMSC | JTAG TMSC, high-drive capability |
12 | JTAG_TCKC | JTAG_TCKC | JTAG TCKC |
13 | VCC | VCC | Power supply: 1.8 V ~ 3.8 V, 3.3 V re recommended. |
14 | GND | GND | Ground |
15 | DIO14 | GPIO | GPIO |
16 | DIO15 | GPIO | GPIO |
17 | DIO16 | GPIO | GPIO, JTAG_TDO, high-drive capability |
18 | DIO17 | GPIO | GPIO, JTAG_TDI, high-drive capability |
19 | DIO18 | GPIO | GPIO |
20 | DIO19 | GPIO | GPIO |
21 | DIO20 | GPIO | GPIO |
22 | DIO21 | GPIO | GPIO |
23 | DIO22 | GPIO | GPIO |
24 | DIO23 | GPIO or Analog | GPIO, analog capability |
25 | DIO24 | GPIO or Analog | GPIO, analog capability |
26 | DIO25 | GPIO or Analog | GPIO, analog capability |
27 | DIO26 | GPIO or Analog | GPIO, analog capability |
28 | DIO27 | GPIO or Analog | GPIO, analog capability |
29 | GND | GND | Ground |
30 | ANT | - | External antenna interface |
